Material


Stainihard®NC was developed for austenitic stainless steel and Duplex materials. In certain cases it is also possible to treat different materials (e.g. PH steel).
Some examples of suitable materials are:

AISI:
301, 302, 302HQ, 303, 304, 304L, 314, 314L, 316, 316L, 316LN, 316S, 316LVM, 316Ti, 317L, 318 LN, 321. 

DIN number:
1.4301, 1.4305, 1.4306, 1.4307, 1.4310, 1.4319, 1.4401, 1.4404, 1.4408 1.4429, 1.4435, 1.4438, 1.4462, 1.4441,1.4541, 1.4547, 1.4550, 1.4567, 1.4571. 1.4841

EN 10088 nummer:
X10CrNi 18 8 - X12CrNi 18 8 - X3CrNiCu 18 9 - X10CrNiS 18 8
X5CrNi 18 10 - X2CrNi 18 9 - X2CrNi 19 11 - X6CrNiTi 18 10
X5CrNiMo 17 12 2 - X6CrNiMoTi 17 12 2 - X2CrNiMo 17 13 2
X2CrNiMoN 17 13 3 - X2CrNiMo 18 14 3 - X2CrNiMo 18 15 3
X3CrNiMo 18 16 4 - X1CrNiMoCuN 20 18 7 - X2CrNiMoN22-5-3.
X15CrNiSi25-20.
Our specialists will be glad to advise you on all possibilities of Stainihard®NC. info.eindhoven@hauckht.com 
 

Are you looking for a solution for non-or low-alloyed materials, please refer to: www.nitrotec.eu

 

 Materials

 

 
Sitemap     Terms of delivery     Impressum     Credits     Press Releases     Working Standard H&ST